Experimental Incubator/2.1 mamut tamna: Difference between revisions

From Food Hacking Base
Jump to navigation Jump to search
No edit summary
No edit summary
 
(4 intermediate revisions by 2 users not shown)
Line 15: Line 15:


<gallery widths=200x heights=200px perrow=3 caption="Basic overview of the cool box set up">
<gallery widths=200x heights=200px perrow=3 caption="Basic overview of the cool box set up">
File:Experimental_incubator_mamut_tamna_2_1_cool_box_overview_800_600_faa08062014.jpg|Overview of the set up of the experimental incubator 2.1 mamut tamna
File:Experimental_incubator_mamut_tamna_2_1_cool_box_overview_800_600_faa08062014.jpg|Overview of the set up of the experimental incubator 2.1 mamut tamna.
File:Experimental_incubator_mamut_tamna_2_1_cool_box_cooling_brain_wires_800_600_faa08062014.jpg|Close up on the heating/cooling unit, arduino brain and wiring.
File:Experimental_incubator_mamut_tamna_2_1_cool_box_cooling_brain_wires_800_600_faa08062014.jpg|Close up on the heating/cooling unit, arduino brain and wiring.
File:Experimental_incubator_mamut_tamna_2_1_cool_box_chamber_view_800_600_faa08062014.jpg|Internal chamber with 500 ml swing top bottle to get idea about the real size.
File:Experimental_incubator_mamut_tamna_2_1_cool_box_chamber_view_800_600_faa08062014.jpg|Internal chamber with 500 ml swing top bottle to get idea about the real size.
Line 26: Line 26:
</gallery>
</gallery>


'''Heating Experiment''' 25/5/2014
{| class="wikitable sortable"
! Time (min) !! Internal temperature (t) (°C) !! External t (°C) !! Difference of internal t (°C) !! Sum of t difference (°C)
|-
|0||23.12||23.4||0||0
|-
|10||31.18||24||8.06||8.06
|-
|20||36.75||24.2||5.57||13.63
|-
|30||41.31||24.3||4.56||18.19
|-
|40||43.12||24.4||1.81||20
|-
|50||45.06||24.5||1.94||21.94
|-
|60||46.75||24.7||1.69||23.63
|-
|70||47.93||24.7||1.18||24.81
|-
|80||48.81||24.8||0.88||25.69
|-
|90||49.5||24.8||0.69||26.38
|-
|100||49.93||24.8||0.43||26.81
|-
|110||50.37||25.1||0.44||27.25
|-
|120||50.68||25||0.31||27.56
|-
|130||50.87||25||0.19||27.75
|-
|}
[https://docs.google.com/spreadsheets/d/1ClfEz5o31mprQe8M2yDQ_czyGrzlnibrQInlXdKTEZ0/edit#gid=0 Here you can find data in an easy to work with data sheet form].
'''Cooling Experiment''' 26/5/2014
{| class="wikitable sortable"
! Time (min) !! Internal temperature (t) (°C) !! External t (°C) !! Difference of internal t (°C) !! Sum of t difference (°C)
|-
|0||26.18||26||0||0
|-
|10||25.31||26||0.87||0.87
|-
|20||24.81||25.9||0.5||1.37
|-
|30||24.56||26.1||0.25||1.62
|-
|40||24.31||26.1||0.25||1.87
|-
|50||24.06||26||0.25||2.12
|-
|60||23.87||26||0.19||2.31
|-
|70||23.75||25.9||0.12||2.43
|-
|80||23.68||26.1||0.07||2.5
|-
|90||23.62||26.1||0.06||2.56
|-
|100||23.56||26||0.06||2.62
|-
|110||23.42||25.8||0.14||2.76
|-
|120||23.31||25.7||0.11||2.87
|-
|130||23.25||25.9||0.06||2.93
|-
|}
[https://docs.google.com/spreadsheets/d/1ClfEz5o31mprQe8M2yDQ_czyGrzlnibrQInlXdKTEZ0/edit#gid=0 Here you can find data in an easy to work with data sheet form].


'''Temporary post about Marcel's experiment'''
'''Temporary post about Marcel's experiment'''


Marcel is using a box made from layered plywood desks and insulated by PIR (thickness???) boards. The internal dimensions of incubator chamber are a=42.5, b=49 cm and c=45.5cm, total volume = 0.095m3. Two peltiers were used for heating and cooling type: tec 12709, which is having 138W of power at 15.2V. At 12V the peak current is 7.5A at turn on which quickly settles down to 5.6A stable, which is only 67W, both for heating and for cooling per peltier, therefore 134W total heating respectively cooling power.   
<gallery widths=200x heights=200px perrow=3 caption="Marcel's experimental incubator set up">
File:Experimental_incubator_mamut_2_1_mvdp_heating_cooling_brain_wiring_mvdp_22052014.jpg|Overview of Marcel's set up - brain, wiring and the heating/cooling unit at the top of the incubator (yes and fancy paper with notes so "he is actually doing science!" while I did not put a paper with notes on my incubator so I'm just screwing around ... :-) )
File:Experimental_incubator_mamut_2_1_mvdp_set_up_overview_mvdp_07062014.jpg|Whole box view.
File:Experimental_incubator_mamut_2_1_mvdp_temperature_reading_mvdp_22052014.jpg|Temperature reading is quite convenient, don't you think?
</gallery>
 
Marcel is using a box made from 3cm layered plywood desks and insulated by 5cm PIR boards. The internal dimensions of incubator chamber are a=42.5, b=49 cm and c=45.5cm, total volume = 0.095m3. Two peltiers were used for heating and cooling type: TEC1-12709, which has peak power of 138W at 15.2V but rated 90W at 12V. At 12V the peak current is 7.5A at turn on which quickly settles down to 5.6A stable, which is only 67W, both for heating and for cooling per peltier, therefore 134W total heating respectively cooling power.   





Latest revision as of 03:12, 14 June 2014

On this page you can find more info abot the experimental incubator 2.1 Mamut-Tamna prototype, where Tamna suggests locality where it was build and tested.

This prototype was build based on the blueprints of the 2.1 mamut within the Food Hacking Base group project which help was truly appreciated.


Desired features, goals of the prototype

This prototype was aiming to function in a same manner as 2.1 mamut measuring therefore the temperature within the incubator chamber, displaying it on the LCD display, allowing for heating and cooling functions set by button interface running software shared in our Github repository. The power was sourced from a standard computer PSU offering therefore 5 VDC and 12 VDC. For heating the peltier element was used, power estimated to 60 W. The distribution of the heat was carried out by two aluminium heat sinks and thermal paste which were cooled by standard PCU fans, each mounted on the top of the heat sink. The peltier and fans were controlled by Arduino through a circuit composing of darlington transistor multiplying the signal from the Arduino digital pin to switch on/off the mechanical relay providing the power for the fans and peltier (two separated outputs).

Below you can find two different set ups for testing. First, let's say temporary one had a polystyrene box as a chamber, size: a=76cm, b=46 cm and c=46 cm; V= 0.160 816 m3, front of the box covered by think polystyrene insulation and cardboard paper. The heating and cooling unit were attached on the top of the box (in the hole cut and sealed in the polystyrene). Second set up had "cooler box" as a chamber, size: a=55cm, b=30cm and c=29cm. The heating and cooling unit was set in a wooden frame made sealed by "polystyrene like" insulation and silicon positioned on the top of the box with doors opening at a side from bottom up.


Performance - Latest testing - cooler box



Heating Experiment 25/5/2014

Time (min) Internal temperature (t) (°C) External t (°C) Difference of internal t (°C) Sum of t difference (°C)
0 23.12 23.4 0 0
10 31.18 24 8.06 8.06
20 36.75 24.2 5.57 13.63
30 41.31 24.3 4.56 18.19
40 43.12 24.4 1.81 20
50 45.06 24.5 1.94 21.94
60 46.75 24.7 1.69 23.63
70 47.93 24.7 1.18 24.81
80 48.81 24.8 0.88 25.69
90 49.5 24.8 0.69 26.38
100 49.93 24.8 0.43 26.81
110 50.37 25.1 0.44 27.25
120 50.68 25 0.31 27.56
130 50.87 25 0.19 27.75

Here you can find data in an easy to work with data sheet form.

Cooling Experiment 26/5/2014

Time (min) Internal temperature (t) (°C) External t (°C) Difference of internal t (°C) Sum of t difference (°C)
0 26.18 26 0 0
10 25.31 26 0.87 0.87
20 24.81 25.9 0.5 1.37
30 24.56 26.1 0.25 1.62
40 24.31 26.1 0.25 1.87
50 24.06 26 0.25 2.12
60 23.87 26 0.19 2.31
70 23.75 25.9 0.12 2.43
80 23.68 26.1 0.07 2.5
90 23.62 26.1 0.06 2.56
100 23.56 26 0.06 2.62
110 23.42 25.8 0.14 2.76
120 23.31 25.7 0.11 2.87
130 23.25 25.9 0.06 2.93

Here you can find data in an easy to work with data sheet form.

Temporary post about Marcel's experiment

Marcel is using a box made from 3cm layered plywood desks and insulated by 5cm PIR boards. The internal dimensions of incubator chamber are a=42.5, b=49 cm and c=45.5cm, total volume = 0.095m3. Two peltiers were used for heating and cooling type: TEC1-12709, which has peak power of 138W at 15.2V but rated 90W at 12V. At 12V the peak current is 7.5A at turn on which quickly settles down to 5.6A stable, which is only 67W, both for heating and for cooling per peltier, therefore 134W total heating respectively cooling power.


Performance - previous testing - polystyrene box

At approximately 20-21°C external temperature, heating the chamber for two hours resulted in 14.25°C increase of temperature from 18.56°C to 32.81°C (12.06°C temperature increase after first hour). Cooling at similar external temperature resulted in 3.62°C temperature decrease after 2 hours, cooling the chamber from 20.93°C to 17.25°C (3°C after temperature decrease after first hour).

I've shared a link to the Google spreadsheet so you can have a look on the values, however all of the values and graphs are shared below too.


Heating Experiment 14/4/2014

Time (min) Internal temperature (t) (°C) External t (°C) Difference of internal t (°C) Sum of t difference (°C)
0 18.56 20.10 0.00 0
10 23.10 20.00 4.54 4.54
20 25.87 20.10 2.77 7.31
30 27.56 20.30 1.69 9.00
40 28.75 20.40 1.19 10.19
50 29.81 20.60 1.06 11.25
60 30.62 20.70 0.81 12.06
70 31.25 20.80 0.63 12.69
80 31.75 20.90 0.50 13.19
90 32.12 21.00 0.37 13.56
100 32.37 21.00 0.25 13.81
110 32.68 21.10 0.31 14.12
120 32.81 21.10 0.13 14.25
130 33.00 21.10 0.19 14.44


Cooling Experiment 17/4/2014

Time (min) Internal temperature (t) (°C) External t (°C) Difference of internal t (°C) Sum of t difference (°C)
0 20.93 21.9 0 0
10 19.68 22.4 1.25 1.25
20 19.06 22.4 0.62 1.87
30 18.62 22.4 0.44 2.31
40 18.31 22.4 0.31 2.62
50 18.12 22.3 0.19 2.81
60 17.93 22.3 0.19 3
70 17.81 22.2 0.12 3.12
80 17.62 22.1 0.19 3.31
90 17.56 22.1 0.06 3.37
100 17.5 22.1 0.06 3.43
110 17.37 21.9 0.13 3.56
120 17.31 21.9 0.06 3.62
130 17.25 21.8 0.06 3.68